# Welder Arc Three Phase 450 to 650Amp Suitable for a wide range of welding applications where continuous welding is required. - **Item code:** 654B - **Category:** Plumbing & Metal Work - **Subcategory:** Welders ## Hire rates Default national retail rates, including damage waiver and GST. Rates vary by branch and hire duration. - $123.60 for 4 hours - $154.50 for 24 hours - $612.86 per week ## Specifications - **Maximum Current output:** 400 amp - **Maximum current draw:** 7 amps 3 phase - **Length:** 541mm - **Width:** 360mm - **Height:** 420mm Weight 34.7kg ## Safety ### Recommended safety equipment - **Hearing Protection**: To guard against excessive noise and prevent hearing loss, wear earplugs or ear muffs of the appropriate grade when using this equipment. - **Eye Protection**: Suitable eye protection is required when operating this equipment. - **Head Protection**: A safety helmet is required when operating this equipment to provide protection from overhead & moving/falling objects. Safety helmets with air muffs and full face visors are also available. Long/loose hair should be tied up or restrained with a hair net. - **Hand Protection**: Suitable hand protection appropriate to the specific hazards must be worn when using this equipment (e.g. PVC for chemicals, cotton fordirt and dust etc.) - **Foot Protection**: Firm footwear providing support for the foot and ankle is required with good tread allowing for solid grip on surfaces. Full safety boots should be considered for maximum foot protection. - **Shock Protection**: Warning - risk of electric shock. Using a residual current device (RCD) to protect the user from electric shock is recommended when using electrical equipment outdoors or in damp and wet conditions. - **Protective Clothing**: Suitable protective clothing is required to protect from accidental splashing and debris and to contain loose clothing to prevent entanglement in moving parts. - **Full Face Shield**: Suitable face protection required. Several types are available to suit different applications such as full mesh for chainsaws & scrubcutters, clear shields for water blasting or welding helmets for arcwelding. - **Toxic Materials**: WARNING TOXIC GASES CAN BE HARMFULL OR FATAL. Engine/Heater exhaust gases are toxic: Do not operate in enclosed or confined spaces such as tanks, pits and other enclosed areas. Use only in well ventilated areas outside downwind from working site. ### Transport safety notes - **Station Wagon / Van**: A station wagon or van is the preferred transportation method. - **Trailer**: A trailer is the preferred transportation method for this product.This icon may not depict the appropriate type of trailer. - **Utility**: A utility vehicle is the preferred transportation method for this product, note some products may require a headboard fitted to ute. - **Truck**: A truck is the preferred transportation method for this equipment - **Delivery**: Hirepool can arrange delivery through our preferred specialised transport provider. To find out more on delivery costs please contact your local Hirepool in 0800 151515. ## Related gear and accessories ### Recommended items - [Extension Lead Three Phase 32Amp to 20 metres (342A)](https://www.hirepool.co.nz/products/equipment/generators-power-distribution/generator-accesssories-cables/342a-extension-lead-three-phase-32amp-to-20-metres.md): $41.20 for 4 hours - [Electrical Adaptor All Types (342D)](https://www.hirepool.co.nz/products/equipment/generators-power-distribution/generator-accesssories-cables/342d-electrical-adaptor-all-types.md): $12.57 for 4 hours ## Documents and guides ### Instructions for use - [Welding - Instructions For Use](https://www.hirepool.co.nz/instructions/welding-instructions-for-use.md) ## Delivery and pickup ### Delivery instructions - If you wish for this item to be delivered, please provide your information. - We aim to deliver within 2 hrs of your selected delivery time. - All deliveries and pickups must be in a safe area to unload, demonstrate the equipment and complete paperwork. - Any delivery amount displayed is 'one-way' and for one load only. - If multiple vehicles are required for delivery, we will contact you prior. ### Pickup your gear up? If you're coming to pick your gear up, please have the following information ready with you. - Make sure you have a form of ID on you. - We provide demonstration of the gear. Please set some time aside if you can. Full details, availability and branch pricing: https://www.hirepool.co.nz/products/equipment/plumbing-metal-work/welders/654b-welder-arc-three-phase-450-to-650amp

Welder Arc Three Phase 450 to 650Amp

Product code: 654B

Not all products are available in all branches.

Hire a Welder Arc Three Phase 450 to 650Amp (product code 654B) from Hirepool: $123.60 for 4 hours, $154.50 for 24 hours, $612.86 per week.

Prices are in New Zealand dollars and include GST and damage waiver. This is the default national rate, not a quote - pricing varies by branch.

Book now
Enquire
{{ product.PriceOptions.OriginalFourHourRate | currency }} {{ product.PriceOptions.FourHourRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalDayRate | currency }} {{ product.PriceOptions.DayRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }} {{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }} {{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.WeekRate | currency }}
{{ product.PriceOptions.ListPrice | currency }}
Select hire period

OR

Login for trade rate
{{ user.TradeAccountName }} pricing
Switch account for other rates

OR

Login for trade rate

CHANGE BRANCH

Set your branch

For us to show you pricing, you need to select your local branch

Set branch
{{ currentBranch.BranchName }}
Change
Enter a postcode, suburb or region
Detect current location

OR

Login for trade rate
Branch
{{ currentBranch.BranchName }}
Change
Enter a postcode, suburb or region
Detect current location
Choose your hire period
Hire period
{{ label }}
{{ value | moment('D/M/YYYY') }}
{{ value | moment('h:mm A') }}
Change
{{ pickerTitle }}

Some branches are closed on Sunday.
{{ label }}
{{ value | moment('D/M/YYYY') }}
{{ value | moment('h:mm A') }}
Change
{{ pickerTitle }}

{{ hirePeriodAdjustedMessage }}

Enquire about this product

Enquire

{{errorMessage}}

Detect current location
{{ errorMessage }}

There are no branches matching your search.

Close

Recommended safety equipment

Hearing Protection
To guard against excessive noise and prevent hearing loss, wear earplugs or ear muffs of the appropriate grade when using this equipment.
Eye Protection
Suitable eye protection is required when operating this equipment.
Head Protection
A safety helmet is required when operating this equipment to provide protection from overhead & moving/falling objects. Safety helmets with air muffs and full face visors are also available. Long/loose hair should be tied up or restrained with a hair net.
Hand Protection
Suitable hand protection appropriate to the specific hazards must be worn when using this equipment (e.g. PVC for chemicals, cotton fordirt and dust etc.)
Foot Protection
Firm footwear providing support for the foot and ankle is required with good tread allowing for solid grip on surfaces. Full safety boots should be considered for maximum foot protection.
Shock Protection
Warning - risk of electric shock. Using a residual current device (RCD) to protect the user from electric shock is recommended when using electrical equipment outdoors or in damp and wet conditions.
Protective Clothing
Suitable protective clothing is required to protect from accidental splashing and debris and to contain loose clothing to prevent entanglement in moving parts.
Full Face Shield
Suitable face protection required. Several types are available to suit different applications such as full mesh for chainsaws & scrubcutters, clear shields for water blasting or welding helmets for arcwelding.
Toxic Materials
WARNING TOXIC GASES CAN BE HARMFULL OR FATAL. Engine/Heater exhaust gases are toxic: Do not operate in enclosed or confined spaces such as tanks, pits and other enclosed areas. Use only in well ventilated areas outside downwind from working site.

Transport safety notes

Station Wagon / Van
A station wagon or van is the preferred transportation method.
Trailer
A trailer is the preferred transportation method for this product.This icon may not depict the appropriate type of trailer.
Utility
A utility vehicle is the preferred transportation method for this product, note some products may require a headboard fitted to ute.
Truck
A truck is the preferred transportation method for this equipment
Delivery
Hirepool can arrange delivery through our preferred specialised transport provider. To find out more on delivery costs please contact your local Hirepool in 0800 151515.
Description & safety information

Suitable for a wide range of welding applications where continuous;welding is required.

Not sure if this is the right tool for what you need?

Don’t hesitate to call us on 0800 15 15 15 to chat to your local branch or just pop in. You can also email us here.

Specifications
Maximum Current output:
400 amp
Maximum current draw:
7 amps 3 phase
Length:
541mm
Width:
360mm
Height:
420mm Weight 34.7kg
Related Gear and Accessories

Recommended items (2)

Extension Lead Three Phase 32Amp to 20 metres

From {{ pricing.ListPrice | currency }} {{pricing.RateTag}}
Related Items Mandatory Items ({{ kitItem.MandatoryKitItems.length }})

From {{ pricing.ListPrice | currency }} {{pricing.RateTag}}
Recommended Items ({{ kitItem.OptionalKitItems.length }})
Optional

From {{ pricing.ListPrice | currency }} {{pricing.RateTag}}

Electrical Adaptor All Types

From {{ pricing.ListPrice | currency }} {{pricing.RateTag}}
Related Items Mandatory Items ({{ kitItem.MandatoryKitItems.length }})

From {{ pricing.ListPrice | currency }} {{pricing.RateTag}}
Recommended Items ({{ kitItem.OptionalKitItems.length }})
Optional

From {{ pricing.ListPrice | currency }} {{pricing.RateTag}}
Videos, guides and documents

Instructions for use sheets (1)

Delivery and pickup instructions

Delivery instructions

  • If you wish for this item to be delivered, please provide your information.
  • We aim to deliver within 2 hrs of your selected delivery time.
  • All deliveries and pickups must be in a safe area to unload, demonstrate the equipment and complete paperwork.
  • Any delivery amount displayed is 'one-way' and for one load only.
  • If multiple vehicles are required for delivery, we will contact you prior.

Pickup your gear up?

If you're coming to pick your gear up, please have the following information ready with you.

  • Make sure you have a form of ID on you.
  • We provide demonstration of the gear. Please set some time aside if you can.
Service History

Enter the plant number for your gear to retrieve its service history.

{{ errorMessage }}

Can't find the plant number? Look in these places

Service history for:
{{ serviceHistory.PID }} - {{ serviceHistory.PRODUCT }}

Status Date User Branch
{{ status.PRODUCTSTATUS }} {{ status.DATETIMELASTUPDATED }} {{ status.SRMUSER }} {{ status.DIV }}
Description Last Current
{{ serviceHistory.CURRENTMETERDATE }}
Next Due in
{{ data.DESC }} {{ data.LAST }} {{ serviceHistory.CURRENTMETER }} {{ data.NEXT }} {{ data.DURATION }}

{{ inspectionSheetButtonTitle }}

Similar items

Welder MIG Three Phase 250 to 450Amp
 
{{ product.PriceOptions.OriginalFourHourRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }}
{{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.WeekRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }}
{{ product.PriceOptions.ListPrice | currency }}
Choose a branch for rates
Welder Arc Three Phase 200 to 400Amp
 
{{ product.PriceOptions.OriginalFourHourRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }}
{{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.WeekRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }}
{{ product.PriceOptions.ListPrice | currency }}
Choose a branch for rates
Welder Petrol and Diesel 130 to 225Amp
 
{{ product.PriceOptions.OriginalFourHourRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }}
{{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.WeekRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }}
{{ product.PriceOptions.ListPrice | currency }}
Choose a branch for rates
Welder Petrol and Diesel 250 to 300Amp
 
{{ product.PriceOptions.OriginalFourHourRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }}
{{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.WeekRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }}
{{ product.PriceOptions.ListPrice | currency }}
Choose a branch for rates