# Grinder Angle Single Phase Electric 180mm

Higher speed grinder for the medium to large jobs.

- **Item code:** 382A
- **Category:** Concrete & Masonry
- **Subcategory:** Concrete Grinders

## Hire rates

Default national retail rates, including damage waiver and GST. Rates vary by branch and hire duration.

- $58.50 for 4 hours
- $73.13 for 24 hours
- $293.56 per week

## Specifications

- **Blade diameter:** 180mm

- **Blade hole diameter:** 22mm

- **Power consumption:** 2400 watts

- **No load speed:** 8500rpm

- **Weight:** 5.4kg

## Safety

### Recommended safety equipment

- **Hearing Protection**: To guard against excessive noise and prevent hearing loss, wear earplugs or ear muffs of the appropriate grade when using this equipment.
- **Eye Protection**: Suitable eye protection is required when operating this equipment.
- **Hand Protection**: Suitable hand protection appropriate to the specific hazards must be worn when using this equipment (e.g. PVC for chemicals, cotton fordirt and dust etc.)
- **Shock Protection**: Warning - risk of electric shock. Using a residual current device (RCD) to protect the user from electric shock is recommended when using electrical equipment outdoors or in damp and wet conditions.
- **Breathing Filter**: A suitable face mask should be worn when using this equipment. General purpose disposable dust masks protect against low-risk dust and solid based airborne water sprays. Respiratory masks with appropriate filters are required for fumes and most nuisance levelodours. ALL DUST SHOULD BE CONSIDERED AS HAZARDOUS TO YOUR HEALTHAND POTENTIALLY EXPLOSIVE.

### Transport safety notes

- **Carry**: You can carry this.

## Related gear and accessories

### Recommended items

- FLEX SINGLE PHASE 10A - BULK (341001)
- [PPS metal cut off A46 180 x 3mm psf (CO180PFERD)](https://www.hirepool.co.nz/products/equipment/consumables/metal-cutting/co180pferd-pps-metal-cut-off-a46-180-x-3mm-psf.md): $5.74 each
- [PPS metal grinder A30 178 x 7mm psf (DP180PFERD)](https://www.hirepool.co.nz/products/equipment/consumables/metal-cutting/dp180pferd-pps-metal-grinder-a30-178-x-7mm-psf.md): $7.46 each
- [CO180MPFERD Masonary Cutoff Blade 180mm (CO180MPFERD)](https://www.hirepool.co.nz/settings/products/co180mpferd-masonary-cutoff-blade-180mm.md): $5.95 each
- [DP180MPFERD Masonary Grinding Blade 180mm (DP180MPFERD)](https://www.hirepool.co.nz/settings/products/dp180mpferd-masonary-grinding-blade-180mm.md): $12.13 each
- [Holer masonry cutting 180mm wear charge per mm (W180MMCONC)](https://www.hirepool.co.nz/products/equipment/consumables/diamond-cutting-wear/w180mmconc-holer-masonry-cutting-180mm-hire-charge.md): $29.99 each

## Documents and guides

### Instructions for use

- [Angle Grinder - Instructions For Use](https://www.hirepool.co.nz/instructions/angle-grinder-instructions-for-use.md)

## Delivery and pickup

### Delivery instructions

- If you wish for this item to be delivered, please provide your information.
- We aim to deliver within 2 hrs of your selected delivery time.
- All deliveries and pickups must be in a safe area to unload, demonstrate the equipment and complete paperwork.
- Any delivery amount displayed is 'one-way' and for one load only.
- If multiple vehicles are required for delivery, we will contact you prior.

### Pickup your gear up?

If you're coming to pick your gear up, please have the following information ready with you.

- Make sure you have a form of ID on you.
- We provide demonstration of the gear. Please set some time aside if you can.

Full details, availability and branch pricing: https://www.hirepool.co.nz/products/equipment/concrete-masonry/concrete-grinders/382a-grinder-angle-single-phase-electric-180mm