# Hikoki Cordless Rebar Cutter/Bender

For cutting and bending a large quantity of reinforcing bar. Angle of bend can be set so all the bends will be the same.

- **Item code:** 311A
- **Category:** Concrete & Masonry
- **Subcategory:** Concrete Cutting

## Hire rates

Default national retail rates, including damage waiver and GST. Rates vary by branch and hire duration.

- $115.37 for 4 hours (normally $181.29)
- $144.20 for 24 hours (normally $226.61)
- $632.51 per week (normally $993.96)

Promotion: Online Exclusive, ends 5 November 2026

## Specifications

- **Make:** Hikoki

- **Model:** VB3616DA

- **Maximum capacity:** 16mm

- **Battery Voltage:** 36V

- **Battery:** 2x

- **Preset bend angles:** 45 to 180

- **Length:** 510mm

- **Width:** 230mm

- **Height:** 241mm

- **Weight:** 19.2kg

## Safety

### Recommended safety equipment

- **Hearing Protection**: To guard against excessive noise and prevent hearing loss, wear earplugs or ear muffs of the appropriate grade when using this equipment.
- **Eye Protection**: Suitable eye protection is required when operating this equipment.
- **Hand Protection**: Suitable hand protection appropriate to the specific hazards must be worn when using this equipment (e.g. PVC for chemicals, cotton fordirt and dust etc.)
- **Foot Protection**: Firm footwear providing support for the foot and ankle is required with good tread allowing for solid grip on surfaces. Full safety boots should be considered for maximum foot protection.

### Transport safety notes

- **Carry**: You can carry this.

## Documents and guides

### Instructions for use

- [Rebar Cutter/Bender Electric - Instructions For Use](https://www.hirepool.co.nz/instructions/rebar-cutterbender-electric-instructions-for-use.md)

### Operators Manual

- [Hikoki VB3616DA Operators Manual](https://www.hirepool.co.nz/media/iwanbh3t/18-20201006103716_pts_196.pdf)

### Specifications Sheet

- [311A Hikoki VB3616DA Spec Sheet.pdf](https://www.hirepool.co.nz/media/w4vmcx5x/18-20201006103405_pts_196.pdf)

### Guides and videos

- [How To Use Hikoki Cordless Rebar Cutter/Bender](https://www.hirepool.co.nz/guides/trade/how-to-use-hikoki-cordless-rebar-cutter-bender.md) (video)

### Videos

- [36V 16mm Brushless Rebar Cutter / Bender Kit](https://youtu.be/WCcInTpkckg)
- [Hikoko Rebar Cutter/Bender 36V - First Impressions On Site](https://youtu.be/usOs1SL4o7w)

## Delivery and pickup

### Delivery instructions

- If you wish for this item to be delivered, please provide your information.
- We aim to deliver within 2 hrs of your selected delivery time.
- All deliveries and pickups must be in a safe area to unload, demonstrate the equipment and complete paperwork.
- Any delivery amount displayed is 'one-way' and for one load only.
- If multiple vehicles are required for delivery, we will contact you prior.

### Pickup your gear up?

If you're coming to pick your gear up, please have the following information ready with you.

- Make sure you have a form of ID on you.
- We provide demonstration of the gear. Please set some time aside if you can.

Full details, availability and branch pricing: https://www.hirepool.co.nz/products/equipment/concrete-masonry/concrete-cutting/311a-cordless-rebar-cutter-bender