# Hikoki Cordless Rebar Cutter/Bender For cutting and bending a large quantity of reinforcing bar. Angle of bend can be set so all the bends will be the same. - **Item code:** 311A - **Category:** Concrete & Masonry - **Subcategory:** Concrete Cutting ## Hire rates Default national retail rates, including damage waiver and GST. Rates vary by branch and hire duration. - $181.29 for 4 hours - $226.61 for 24 hours - $993.96 per week ## Specifications - **Make:** Hikoki - **Model:** VB3616DA - **Maximum capacity:** 16mm - **Battery Voltage:** 36V - **Battery:** 2x - **Preset bend angles:** 45 to 180 - **Length:** 510mm - **Width:** 230mm - **Height:** 241mm - **Weight:** 19.2kg ## Safety ### Recommended safety equipment - **Hearing Protection**: To guard against excessive noise and prevent hearing loss, wear earplugs or ear muffs of the appropriate grade when using this equipment. - **Eye Protection**: Suitable eye protection is required when operating this equipment. - **Hand Protection**: Suitable hand protection appropriate to the specific hazards must be worn when using this equipment (e.g. PVC for chemicals, cotton fordirt and dust etc.) - **Foot Protection**: Firm footwear providing support for the foot and ankle is required with good tread allowing for solid grip on surfaces. Full safety boots should be considered for maximum foot protection. ### Transport safety notes - **Carry**: You can carry this. ## Documents and guides ### Instructions for use - [Rebar Cutter/Bender Electric - Instructions For Use](https://www.hirepool.co.nz/instructions/rebar-cutterbender-electric-instructions-for-use.md) ### Operators Manual - [Hikoki VB3616DA Operators Manual](https://www.hirepool.co.nz/media/iwanbh3t/18-20201006103716_pts_196.pdf) ### Specifications Sheet - [311A Hikoki VB3616DA Spec Sheet.pdf](https://www.hirepool.co.nz/media/w4vmcx5x/18-20201006103405_pts_196.pdf) ### Guides and videos - [How To Use Hikoki Cordless Rebar Cutter/Bender](https://www.hirepool.co.nz/guides/trade/how-to-use-hikoki-cordless-rebar-cutter-bender.md) (video) ### Videos - [36V 16mm Brushless Rebar Cutter / Bender Kit](https://youtu.be/WCcInTpkckg) - [Hikoko Rebar Cutter/Bender 36V - First Impressions On Site](https://youtu.be/usOs1SL4o7w) ## Delivery and pickup ### Delivery instructions - If you wish for this item to be delivered, please provide your information. - We aim to deliver within 2 hrs of your selected delivery time. - All deliveries and pickups must be in a safe area to unload, demonstrate the equipment and complete paperwork. - Any delivery amount displayed is 'one-way' and for one load only. - If multiple vehicles are required for delivery, we will contact you prior. ### Pickup your gear up? If you're coming to pick your gear up, please have the following information ready with you. - Make sure you have a form of ID on you. - We provide demonstration of the gear. Please set some time aside if you can. Full details, availability and branch pricing: https://www.hirepool.co.nz/products/equipment/concrete-masonry/concrete-cutting/311a-cordless-rebar-cutter-bender

Hikoki Cordless Rebar Cutter/Bender

Product code: 311A

Not all products are available in all branches.

Hire a Hikoki Cordless Rebar Cutter/Bender (product code 311A) from Hirepool: $181.29 for 4 hours, $226.61 for 24 hours, $993.96 per week.

Prices are in New Zealand dollars and include GST and damage waiver. This is the default national rate, not a quote - pricing varies by branch.

Book now
Enquire
{{ product.PriceOptions.OriginalFourHourRate | currency }} {{ product.PriceOptions.FourHourRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalDayRate | currency }} {{ product.PriceOptions.DayRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }} {{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }} {{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.WeekRate | currency }}
{{ product.PriceOptions.ListPrice | currency }}
Select hire period

OR

Login for trade rate
{{ user.TradeAccountName }} pricing
Switch account for other rates

OR

Login for trade rate

CHANGE BRANCH

Set your branch

For us to show you pricing, you need to select your local branch

Set branch
{{ currentBranch.BranchName }}
Change
Enter a postcode, suburb or region
Detect current location

OR

Login for trade rate
Branch
{{ currentBranch.BranchName }}
Change
Enter a postcode, suburb or region
Detect current location
Choose your hire period
Hire period
{{ label }}
{{ value | moment('D/M/YYYY') }}
{{ value | moment('h:mm A') }}
Change
{{ pickerTitle }}

Some branches are closed on Sunday.
{{ label }}
{{ value | moment('D/M/YYYY') }}
{{ value | moment('h:mm A') }}
Change
{{ pickerTitle }}

{{ hirePeriodAdjustedMessage }}

Enquire about this product

Enquire

{{errorMessage}}

Detect current location
{{ errorMessage }}

There are no branches matching your search.

Close
Low stock

Stock is limited. Please call your branch to confirm availability before booking.

Recommended safety equipment

Hearing Protection
To guard against excessive noise and prevent hearing loss, wear earplugs or ear muffs of the appropriate grade when using this equipment.
Eye Protection
Suitable eye protection is required when operating this equipment.
Hand Protection
Suitable hand protection appropriate to the specific hazards must be worn when using this equipment (e.g. PVC for chemicals, cotton fordirt and dust etc.)
Foot Protection
Firm footwear providing support for the foot and ankle is required with good tread allowing for solid grip on surfaces. Full safety boots should be considered for maximum foot protection.

Transport safety notes

Carry
You can carry this.
Description & safety information

For cutting and bending a large quantity of reinforcing bar. Angle of;bend can be set so all the bends will be the same.

Not sure if this is the right tool for what you need?

Don’t hesitate to call us on 0800 15 15 15 to chat to your local branch or just pop in. You can also email us here.

Specifications
Make:
Hikoki
Model:
VB3616DA
Maximum capacity:
16mm
Battery Voltage:
36V
Battery:
2x
Preset bend angles:
45 to 180
Length:
510mm
Width:
230mm
Height:
241mm
Weight:
19.2kg
Videos, guides and documents Delivery and pickup instructions

Delivery instructions

  • If you wish for this item to be delivered, please provide your information.
  • We aim to deliver within 2 hrs of your selected delivery time.
  • All deliveries and pickups must be in a safe area to unload, demonstrate the equipment and complete paperwork.
  • Any delivery amount displayed is 'one-way' and for one load only.
  • If multiple vehicles are required for delivery, we will contact you prior.

Pickup your gear up?

If you're coming to pick your gear up, please have the following information ready with you.

  • Make sure you have a form of ID on you.
  • We provide demonstration of the gear. Please set some time aside if you can.
Service History

Enter the plant number for your gear to retrieve its service history.

{{ errorMessage }}

Can't find the plant number? Look in these places

Service history for:
{{ serviceHistory.PID }} - {{ serviceHistory.PRODUCT }}

Status Date User Branch
{{ status.PRODUCTSTATUS }} {{ status.DATETIMELASTUPDATED }} {{ status.SRMUSER }} {{ status.DIV }}
Description Last Current
{{ serviceHistory.CURRENTMETERDATE }}
Next Due in
{{ data.DESC }} {{ data.LAST }} {{ serviceHistory.CURRENTMETER }} {{ data.NEXT }} {{ data.DURATION }}

{{ inspectionSheetButtonTitle }}

Similar items

Concrete Saw 350mm Battery Hand
 
{{ product.PriceOptions.OriginalFourHourRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }}
{{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.WeekRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }}
{{ product.PriceOptions.ListPrice | currency }}
Choose a branch for rates
Concrete Tub Saw Electric 350mm
 
{{ product.PriceOptions.OriginalFourHourRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }}
{{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.WeekRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }}
{{ product.PriceOptions.ListPrice | currency }}
Choose a branch for rates
Concrete Saw Petrol Walk Behind 350mm
 
{{ product.PriceOptions.OriginalFourHourRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }}
{{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.WeekRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }}
{{ product.PriceOptions.ListPrice | currency }}
Choose a branch for rates
Concrete Saw Tile Electric 300mm
 
{{ product.PriceOptions.OriginalFourHourRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.OriginalWeekRate | currency }}
{{ product.PriceOptions.WeekRate | currency }} {{product.RateTag}}
{{ product.PriceOptions.WeekRate | currency }}
{{ product.PriceOptions.FourHourRate | currency }}
{{ product.PriceOptions.ListPrice | currency }}
Choose a branch for rates